|
TOBY : Compact Black Fuel Processing System for Diesels |
Personal Unit for All BioFuel Blends |
single vehicles or small tractors |
|
TOBY
SYSTEM
Waste Oil Black
Fuel Processor for Diesel Engines
COMPONENTS and
SET-UP
(1)
16 gallon poly tank
(1)
12 Volt pump, biodiesel
compatible, with leads and on/off switch
(1)
10 micron stainless steel
screen filter, washable
(1)
1 micron poly cartridge
with housing, washable
(1)
dual-pole polymer filtration pod
(1)
fuel hose
(1)
fuel trigger gun
(1)
instruction manual
The complete
package comes with all parts pre-assembled
and labeled with diagram set-up instructions.
|
|
| PRICE |
$950.00
USD |
| SHIPMENT |
($100
$50 shipping) shipped same
day the check clears or when payment is received
|
| SPEED |
Processes 32
gallons per hour comfortably.
Averages of 16
gallons per hour.
100 -
300 gallons per
week is an average*.
*starting at 90/10 (90%
diesel/10% waste oil mix)... (50/50 mixture
takes longer)
good for
an individual or a company with smaller
needs
see
Blending Chart on home page |
| FILTRATION |
Cleans and decontaminates
the oil/fuel mixture as close as 1
- 25 microns (removes
harmful substances, such as acids, water,
antifreeze, paraffin, metal, ...) |
| CAPACITY |
16 gallons
can be filtered and dispensed into
a tank of operator's choice. |
| MOBILITY |
Small enough to fit
onto a hand truck or in a truck bed or car
trunk |
| MAINTENANCE |
Clean 1 stainless
steel filter every 100
gallons.
Clean 1 poly
cartridge filter every 100
gallons.
Replace 1 poly
cartridge filter every 300
gallons. |
| OPERATION |
Filter clean fuel and
dispense on-site with simple 12
Volt connection.
Wait 5
minutes between mixing and pumping. |
|
|
PRICE $950.00 USD
SHIPMENT ($100 $50 shipping)
Shipped same day the check clears, or when payment
is received.
|
LIFESPAN of FILTRATION POD : 10,000 - 15,000 gallons
(depending upon the amounts of water and antifreeze allowed to corrode the system and the filtration pods)
The TOBY system is designed as a mobile unit, and you may connect its 12 Volt pump to your vehicle's battery anytime for refueling.
|
System Operations
MIXING
Step 1. Add waste oil and fuel to the tank.
Step 2. Connect a power drill and stir with the provided mixing shaft* for 5-10 seconds.
*Step 3. Before starting the pump, always allow 5 minutes for fuel to sit in mixing tank (to let filtration beads do their work).
PUMPING
Step 4. Connect the pump's leads to a 12 Volt source.
Step 5. Turn on the on/off switch.
Step 6. Be ready to fill a tank with the fuel trigger gun.
REMEMBER: *Wait 5 minutes between mixing and pumping.
|
|
