|
CX-1 : Commercial Grade Black Fuel Processing System for BioDiesel Automotives
|
Custom-Built for All BioFuel Blends |
|
CX-1
SYSTEM COMPONENTS
and SET-UP
(2)
20 gauge steel tanks, UN
rated
(2)
110 Volt
pumps, biodiesel compatible, with remote
control
(2)
1-25 micron
stainless steel filters with magnets, washable
(2)
10 micron paper fuel filters
(1)
dual-pole polymer filtration pod
(1)
fuel hose
(1)
fuel nozzle
(1)
brass drain valve
(3)
brass on/off valves
(1)
internal tank mixing shaft
(2) remote
controls
(1)
instruction manual
The complete
package comes with all parts pre-assembled
and labeled with diagram set-up instructions.
5
Minute Set-up : Simply
tighten 4 valves into the
tanks.
Finally,
tighten 5 quick connect
fittings, and the system is ready for use. |
|
| PRICE |
$3000.00
USD |
| SHIPMENT |
($350
shipping in lower 48 states)
2 weeks manufacturing time,
after check clears or payment is received |
| SPEED |
Processes 250
- 300 gallons
per hour comfortably.
Averages 110
gallons per hour*.
*starting
at 90/10 (90% diesel/10% waste oil mix)...
(50/50 mixture takes longer)
good for heavy duty commercial
needs
see
Blending Chart on home page |
| FILTRATION |
Cleans and decontaminates
the oil/fuel mixture as close as 1
- 25 microns (removes harmful
substances, such as acids, water, antifreeze,
paraffin, metal, ...) |
| CAPACITY |
100 gallons
standing capacity can be kept full
and ready constantly. |
| MOBILITY |
Hauls anywhere as
a refueling station, no need for secondary
storage tank |
| MAINTENANCE |
Clean 2
stainless steel filters and replace 2
steel canister filters every 800
- 2000 gallons.
Drain the system every
2500 - 5,000 gallons.
Maintenance depends on
how dirty the original waste oil was. |
| OPERATION |
Fully remote controlled
feature allows the operator total command
of the system.
Filter clean fuel and
dispense on-site with 110
Volt connection.
Wait 5
minutes between mixing and pumping. |
|
PRICE
$3000.00 USD
SHIPMENT ($350 shipping
in lower 48 states)
2 weeks manufacturing time, after check clears or
payment is received.
|
LIFESPAN of FILTRATION POD : 50,000 - 150,000 gallons
(depending upon the amounts of water and antifreeze allowed to corrode the system and the filtration pods)
The CX-1 fuel nozzle is like that at a gas station, and it can be used as a mobile refueling station without requiring a secondary storage tank.
|
System Operations
MIXING
Step 1. Add waste oil and fuel to the 1st steel tank mixing shaft.
Step 2. Connect a power drill and stir with the provided mixing shaft* for 15-20 seconds.
PUMPING
Step 3. Open 2 on/off valves in between both tanks.
Step 4. Turn pump #1 on with the remote control.
Step 5. Fill 2nd tank until full.
Step 6. Repeat step #1.
Step 7. Turn on the last on/off valve and turn on both pumps using the remote controls.
Step 8. Turn on the dispensing pump and be ready to fill a tank with the fuel trigger gun.
Step 9. 100 gallons of fuel will be ready for use within a few minutes.
REMEMBER: *Wait 5 minutes between mixing and pumping.
|
|